How to fix Wyze Camera Error Code 90

I think you’ll agree that it’s always annoying when you’re about to complete an installation and then you get these erratic “error” messages.

The Wyze error code 90 is usually caused by a poor internet connection, therefore, fixing this and making sure that there’s a constant connection between the apps and the server could solve the issue 90% of the time.

For users of Wyze Camera, you may have encountered the famous “Wyze cam error code 90”.

Unfortunately, this problem is quite common in the Wyze Cam Pan, and there are several reasons why this error can occur.

Anyway, I’ll show you how to fix Wyze camera error code 90 and enjoy your Wyze camera.

Wyze error code 90 is usually caused by a poor internet connection. This camera is completely dependent on the internet. If there are problems with the internet connection or wifi coverage, the camera will display many errors and stop working at all.

However, in a few rare cases, the Wyze error code is caused by an incompatibility between the camera and the smartphone or a sloppy MicroSD card.

What does error code 90 mean on the Wyze camera?

First, you may be using the camera with another device that is not compatible with Wyze Cam Pan, such as an older Android or iOS device.

There are also many different reasons why your network might not be compatible with the camera, including an overloaded network or a weak internet signal.

Secondly, The Wyze error code 90 pertains to the camera communication. This means that the streaming servers cannot reach your Wyze Cam.

To resolve the Wyze cam error code 90, make sure that the camera and cell phone can access the Internet and that the router’s firewall is not blocking communication.

So, it is easy to say that the Wyze camera error code 90 happens when your camera is not connected to the app. For example, your camera might cause this to be offline or the camera not being connected to your home network.

Steps: 6 Steps How to fix error code 90 on Wyze camera

Several solutions fix the Wyze camera error code 90, including updating your camera’s firmware and resetting your camera’s settings and concludes with 6 steps:

  1. Check the Internet connection
  2. Remove the SD card from the camera
  3. Change the wifi channel on the router
  4. Please turn off the camera and turn it on again (reboot)
  5. Update the camera
  6. Use a compatible smartphone

If you install the app and encounter “WYZE cam error code 90”, you need to do a Hard Reset. This is also known as performing a factory reset or reboot. After you perform the hard reset, you can download the camera again.

Unfortunately, this will also erase all your settings, so you will need to re-enter your Wi-Fi passwords and other information.

1. Check the Internet connection

As we mentioned earlier, error code 90 is usually caused by internet connection issues. Make sure your internet is working properly and is stable. If you are using Wi-Fi, make sure there is a strong signal covering the camera’s area.

If the camera is more than 18 feet from the router or access point, move the camera closer to see if the problem is fixed. If the error goes away, you have a problem with the internet. Also, try restarting your router, turning it off, waiting for 2 minutes, and turning it back on.

After that, reconnect your smartphone to the Wyze camera via the app.

2. Remove the SD card from the camera

In many cases, Wyze error code 90 is caused by a wonky MicroSD card. The card is not inserted properly, or the connection is not established. Remove the microSD card and reinsert it, making sure it is fully inserted.

Then, turn the camera off and on again and try again to see if the problem is fixed. Also, don’t grab cheap SD cards. Get a decent one.

3. Change the wifi channel on the router

This tip also solves the problem: change the wireless channel from automatic to manual in your router’s settings. It is said that 1, 6, and 11 are the most optimal. However, you should try one at a time to see which one works best for your area.

In automatic mode, the router is constantly jumping channels to find the most optimal one (since all the other routers are doing the same thing), which causes the Wyze camera to connect or disconnect.

4. Turn off the camera and turn it on again (reboot).

Reboot the camera, wait 1 minute and turn it back on. Close the app on the phone and restart it. Restart the phone as well. It has been reported that turning off the camera sometimes fixes the problem.

5. Update the camera

Update the camera and the phone app. Keep your camera updated with the latest firmware. Go to Update Firmware on the Device Details page and make sure your camera is up to date. Also, update the Wyze cam app on your smartphone at the same time.

6. Use a compatible smartphone

In most cases, this error is caused by an incompatibility between the Wyze app and your smartphone. Make sure your Andriod or IOS is updated and compatible with the Wyze App.

Wrapping up…

The Wyze error code 90 is usually caused by a poor internet connection, therefore, fixing this and making sure that there’s a constant connection between the apps and the server could solve the issue 90% of the time.

We hope you fix this error and enjoy your Wyze cam happily ever after.